Skip to main content
LED Frame System Line with a taut red fabric banner and the lettering Neue Kollektion in a boutique

Fabric banner · Fabric print · Cloth banner

Fabric banner printing Fabric banners with silicone edge, made to fit your frame

Our fabric banners are made as fabric prints with a silicone edge all round and are pulled taut into an aluminium frame – crease-free, without eyelets or ropes. You order them together with the matching system: made-to-measure tension fabric frame, display stand, exhibition wall or light wall.

  • €40 net per m² and side, included in the system price
  • Silicone edge tautly tensioned, no eyelets
  • No tools needed artwork can be changed at any time

Systems

Fabric banners with frame: the systems.

Every fabric banner is printed to fit its system exactly and is included in the price shown. We do not offer loose banners with eyelets or pole pockets for hanging.

Cloth banner

Eyelets or silicone edge?

A classic fabric banner hangs from eyelets, ropes or cable ties. That is cheap, but the fabric creases and the fixings remain visible. Instead, our fabric banners have a silicone edge all round: it is pressed into the groove of the aluminium profile, and the fabric stretches smoothly over the frame.

  • Crease-free: the print sits taut in the frame – without the creases that spoil photos and show against the light.
  • Clean edge: a narrow strip disappears into the groove – no eyelets, no ropes.
  • Matt, not glossy: printed fabric reflects far less than glossy PVC banners or vinyl.
  • Swappable: the print can be pulled out without tools and replaced with new artwork – the frame stays.
Diagram: on the left, a loose fabric banner with eyelets, ropes and creases between two posts; on the right, a fabric print taut in an aluminium frame, with the silicone edge in the profile groove under the magnifying glass
Banners with eyelets and fabric prints with silicone edge compared.

Made-to-measure tension fabric frame

Fabric banner printing – with a frame in your size.

For walls, ceilings or stabiliser feet, the tension fabric frame is the simplest solution: you choose width and height in the configurator to the centimetre from 30 to 300 cm, and the profile from a slim 15 mm to 65 mm deep. The fabric print with silicone edge is always included.

Example prices for tension fabric frames with fabric print

VersionSize (W × H)Printed sidesPowerNet pricePrice incl. VAT
Tension fabric frame 15 mm, non-illuminated70 × 100 cmsingle-sidedno power€129.00€153.51
Tension fabric frame 18 mm, non-illuminated100 × 150 cmsingle-sidedno power€297.50€354.03
Tension fabric frame 35 mm, non-illuminated200 × 100 cmsingle-sidedno power€343.75€409.06
Tension fabric frame 35 mm, non-illuminated250 × 150 cmsingle-sidedno power€565.00€672.35
Tension fabric frame 65 mm, non-illuminated300 × 200 cmsingle-sidedno power€1,070.00€1,273.30

Prices include artwork printing (€40 net per m² and printed side), for lightboxes with LED modules and power supply unit, without stabiliser feet and back panel; gross with 19 % VAT, free delivery. The configurator calculates your own size to the centimetre.

If you want the artwork to glow, choose an LED lightbox in the same configurator. Illuminated advertising for shops and shop windows is shown on the page Shop Signage Made to Measure.

Print price

How much does a fabric banner cost?

Printing is charged by area: €40 net per square metre and printed side. It is already included in the price of every system – €68 net for a display stand of 85 × 200 cm, and €276 net for an exhibition wall of 3 × 2.30 m.

€47.60 incl. 19 % VAT · €40.00 net per m² and printed side

Example prices: system including fabric print

SystemPrinted sidesPrint areaArtwork print netArtwork print incl. VATSystem incl. print
Fabric Display Stand85 × 200 cmsingle-sided1.70 m²€68.00€80.92€424.53
Fabric Display Stand100 × 245 cmsingle-sided2.45 m²€98.00€116.62€507.83
Fabric Exhibition Wall XL300 × 230 cmsingle-sided6.90 m²€276.00€328.44€2,172.94
Portable LED Light Wall Classic100 × 200 cmdouble-sided4.00 m² (2 × 2.00 m²)€160.00€190.40€815.15
LED Frame System Line200 × 200 cmsingle-sided4.00 m²€160.00€190.40€2,764.37

Print area = visible final size without bleed. Artwork print €40.00 net per m² and printed side, gross with 19 % VAT; “System incl. print” is the shop price for the size, with free delivery.

Replacement cover

New artwork, same frame.

The frame lasts for years, the artwork changes: new campaign, new trade fair, new season. Because the silicone edge simply sits in the groove, you pull the old print out without tools and press the new one in.

  1. Pull out

    Take hold of the silicone edge at one corner and pull the fabric out of the profile groove all the way round. The frame stays standing.

  2. Insert

    Position the new print at the corners and press the silicone edge into the groove bit by bit until the fabric sits smoothly.

  3. Adjust

    Check all the way round that the silicone edge sits in the groove everywhere. Then the fabric is smooth and crease-free.

We do not sell replacement prints as separate shop items, because every print is made to fit a specific system. Please contact us directly for a new print for your existing system. Everything about printing and design can be found on the page Fabric Printing & Design.

Artwork and templates

Your artwork, print-ready.

Artwork templates for every size, automatic checks on upload – or we design it for you.

Upload your file directly with your order or send it later via your personal upload link. The shop checks format, aspect ratio, resolution and bleed instantly.

  • Final format plus 20 mm bleed all round, 20 mm safe zone for logos and text
  • At least 100 dpi at final size, ideally PDF/X-4 in CMYK
  • Design service: 300 € net for the first system, each additional one in the same design 90 € net
  • Production only starts after you approve the design

Personal advice

Which frame suits your fabric banner?

We help with format, system and artwork files – Monday to Friday from 9 to 17.

+49 40 37420859

Get in touch

Design service

€357.00 incl. 19 % VAT · €300.00 net for the first system, each further system with the same design €90.00 net

The guide Artwork for fabric printing explains how to set up your artwork correctly.

Use cases

Fabric banners in use.

At a trade fair, in a shop or in a workshop: the fabric creates the surface, the frame keeps it in shape.

  • Fabric exhibition stand 3 × 3 m with printed fabric walls of a training company

    Trade fairs and events

    As a back wall, side wall or counter: fabric-covered systems are light, quick to set up and can be reprinted for the next trade fair. Complete stands are shown on the page Buy an exhibition stand.

  • Fabric Exhibition Wall XL with a taut fabric banner at a careers day in a school hall

    Schools, clubs and events

    At a careers day, in a clubhouse or at an annual general meeting, the fabric exhibition wall puts up a large fabric surface – with no power at all.

  • Fabric Display Stand with a fabric print in a joinery showroom

    Trades and showrooms

    The non-illuminated Fabric Display Stand needs no power and fits into any showroom – ideal for references, services and your logo.

Systems and prices

Buy fabric banners with frame.

Choose your system and size, send your artwork, receive it ready-fitted. Free delivery, 3 to 5 working days after receipt of payment and print approval.

You will find all sizes in the collections Fabric Display Stands, Fabric Exhibition Walls and Lightboxes & Tension Fabric Frames. Logo walls for interviews are shown on the page Press wall & sponsor wall.

In short

How much does a fabric banner with frame cost?

We charge printing at €40 net per m² and printed side, and it is already included in the system price. Complete with frame, a fabric banner costs, for example, €409.06 as a tension fabric frame of 200 × 100 cm, from €424.53 as a Fabric Display Stand and €2,172.94 as a Fabric Exhibition Wall XL of 3 × 2.30 m, each including VAT. We do not offer loose banners with eyelets – every print is made with a silicone edge to fit its system exactly.

FAQ

FAQ

Can I order a single fabric banner without a frame?
No. We print every fabric banner to fit one of our systems exactly, with bleed and silicone edge, and the print is included in the system price. We do not offer loose banners with eyelets or pole pockets. Please contact us directly for a new print for a system you have already bought from us.
What is a silicone edge (SEG)?
A silicone edge is a narrow, flexible strip that runs all round the back of the fabric print. It is pressed into the groove of the aluminium profile and holds the fabric taut in the frame. This means the fabric banner needs no eyelets and can be pulled out again without tools.
How much does it cost to print a fabric banner?
Printing costs €40 net per square metre and printed side and is included in the price of the system. A display stand of 85 × 200 cm has 1.7 m² of print area, which accounts for €68 net. The configurator calculates made-to-measure tension fabric frames including printing.
Is the fabric banner washable?
We do not make a general promise about washability here. You will receive the care instructions for your print with your order.
Can I replace the fabric banner later?
Yes. The silicone edge simply sits in the profile groove: you pull the old print out without tools and press the new one in – the frame stays. Please contact us directly for replacement prints, as every print is made precisely for its system.
What artwork files do I need?
Download the artwork template for your system and create your artwork in the final size plus 20 mm bleed all round. Keep logos and text 20 mm from the edge. We recommend PDF/X-4 in CMYK with at least 100 dpi at final size; the shop checks the file when you upload it.
Backlit or blockout – which fabric is right?
For anything that is meant to glow from behind, we use translucent backlit fabric. Non-illuminated systems such as tension fabric frames and the display stand also get a fabric print with silicone edge. Our guide Backlit vs. blockout explains the difference between the fabrics.

Prefer personal advice?

Leave your number – we will call you back on working days between 9:00 and 17:00 and advise you on system, size and print.

Request a callback